Summer is just around the corner. And in some regions across the country, this means the scorching summer heat is back. If you live in these areas, summer can make staying indoors unbearable. As such, you might need to invest in a new AC unit or have your old ones cleaned or replaced.
Before you call an air conditioner contractor, make sure you know the essential things to consider for air conditioner installation.
Size
The size of the AC system is an important consideration when buying a new unit. It should be appropriately sized for the room to achieve the desired room temperature. This simple calculator can help estimate the cooling capacity needed by a room. An improperly sized air conditioning unit can result in shorter lifespan, reduced cooling, and poor comfort. AC that is too small for the space will run continuously to achieve the desired temperature resulting in higher electricity bills and faster wear-and-tear.
Likewise, an AC that is too large will extract an excessive amount of moisture thereby reducing humidity, which can make you feel hot and sticky. The unit will also turn on and off frequently, increasing energy consumption. It is best to consult AC replacement technicians from Hartman to identify the right size of the AC unit.
Cost
Quite obviously, people would prefer the less expensive ac repair cape coral. While lower priced air conditioners lure consumers with instant savings, they come with certain drawbacks. Typically, these appliances lack energy efficiency technology, thereby causing you to spend more on power bills in the long run. Furthermore, since they are probably made of low quality materials, they tend to break down much sooner than their pricey counterparts.
Meanwhile, expensive AC units are equipped with energy-efficient technology and guarantee better durability. Since they consume less electricity, you can significantly reduce your power bills. When choosing an AC system, be sure to correlate the price with its energy efficiency and serviceability.
Quality
Quality is a vital factor in AC installation. When it comes to quality, we’re talking about durability, energy-efficiency, and reliability. You want to invest in a unit that can last long and can handle your cooling needs.
Typically, the price of the unit is directly related to its quality. Pricey air conditioners tend to be of better quality. However, you can always look for alternatives that offer similar serviceability but a lower price. Usually, these are brands that don’t spend much on marketing. A good way to save is by looking for AC installers that offer low installation fees.
Condenser location
Centralized AC systems come with an outdoor condenser unit. This air conditioner component is where the air exchange occurs. Before the installation, you have to consider where the outdoor condenser would be situated, ensuring efficiency and aesthetics.
Ideally, the condenser should be placed in a properly shaded area with sufficient airflow. Excessive exposure to heat can reduce cooling efficiency, cause it to overheat, and get damaged. This can result in poor performance, frequent malfunctions, and shorter lifespan. The condensers should also be placed in an area that is not too far to reduce ductwork.
Ductwork
The ductwork is an important aspect of the AC system. This system of tubes brings the cool air throughout the space. If you are using an existing ductwork, you want to check if it’s still in good condition and that there are no leaks. You can have a reliable aircon contractor inspect the ductwork and seal off the joints or any other opening. Inefficient ductwork can reduce the AC system’s cooling capacity by up to 20%.
Power requirements
Large AC units require more electricity as compared to the smaller ones. Your existing circuit breaker box must be able to handle the electricity load. Some buildings might even require installing extra transformers to supply the needed energy. Likewise, you might also need to upgrade the electrical wiring system to handle the additional load of the AC system. It is best to consult a certified residential electrician of Riverhead to ensure the safety of your air conditioner and your home.
Thermostat
The thermostat is an important component of an air conditioner. It measures the air temperature and controls the AC system. With its encompassing role, you have to choose an air conditioner with an efficient thermostat. Newer AC models now come with a programmable thermostat that enables you to adjust the settings depending on the cooling needs. This will not only minimize the hassle of daily thermostat adjustment but also ensure better comfort. Furthermore, it can save up on energy cost and reduce the impact of wear-and-tear in your AC unit.
These are some of the most important considerations for you to check before installing or replacing your Air Conditioning Industries units. Better yet, you can talk with a trustworthy AC installation company to help you decide properly.